Makita RM350D Setup Manual page 19

2. Stand behind the charging station and pass the boundary wire coming from the left through the hook on the left side (3 hooks) from the bottom.
Fig.25
► 1. Boundary wire coming from the left side 2. Left-side hooks (three places)
3. Insert the connector at the tip of the wire onto the terminal R.
Fig.26
► 1. Terminal R 2. Connector of boundary wire coming from the left side
NOTICE: To prevent the connector from being deformed or damaged, connect the connector straight without tilting it.
4. Likewise, pass the boundary wire coming from the right side through the right-side hooks (three places) in order from the bottom and insert the
connector onto the terminal L.
Fig.27
► 1. Terminal L 2. Connector of boundary wire coming from the right side 3. Right-side hooks (three places)
1
2
1
1
2
2
3
19 ENGLISH
2
2