Makita RM350D Setup Manual page 22

3. Attach the wire cover.
• Pass the cabtire cable through the notch in the wire cover.
Fig.32
► 1. Wire cover 2. Notch
4. Close the terminal cover and connect the power plug of the AC adapter to a power outlet.
Fig.33
► 1. Terminal cover
5. Check that the station indicator lights up green.
• If the boundary wire is connected properly, the station indicator will light up green.
• If there is a connection error, the station indicator will blink red. Remove any abnormalities in the charging station connection part or each wire,
and check the station indicator again.
Fig.34
► 1. Station indicator
1
1
22 ENGLISH
2
1