Something Not Working - Zanussi ZOB 382 User Manual

Fig. A
Replacing The Oven Light
Disconnect the appliance.
If the oven bulb needs replacing, it must comply
with the following specifications:
– Electric power: 15 W/25 W,
– Electric rate: 230 V (50 Hz),
– Resistant to temperatures of 300°C,
– Connection type: E14.
These bulbs are available from your local Serv-
ice Force Centre.
To replace the faulty bulb:

Something not working

If the oven is not working correctly, please carry
out the following checks, before contacting your
local Service Centre.
46
Fig. B
1. Ensure the oven is isolated from the elec-
2. Push in and turn the glass cover anticlock-
3. Remove the faulty bulb and replace with
4. Refit the glass cover and restore the elec-
IMPORTANT!
IMPORTANT: If you call out an engineer to a
fault listed below, or to repair a fault caused by
incorrect use or installation, a charge will be
made even if the appliance is under guarantee.
Fig. C
trical supply.
wise.
the new one.
trical supply.