Table of Contents
Advertisement
Correct the character
Corrections must be made while in the record
pause mode. To make a correction, first press dis¬
play button ® (LOCATION button) until the char¬
acter you wish to change blinks. Then press dis¬
play button ® (CHARACTER [DEL] button) to
select the correct character.
• Character changes will begin with the next
letter (or number) in the sequence.
• To delete a character, select the cursor (the last
character in the set) with display button ®
(CHARACTER [DEL] button).
To record the completed title, press the camera's
start/stop button; any remaining cursors will
disappear.
• The blinking "REC" display, which appears in
the top right corner, will not be recorded.
• The above procedure is for superimposing a
title on the scene you are shooting. If you would
like to record just the title on a blank back¬
ground, cover the lens with a cap or some other
suitable item.
To delete the title during recording, press display
button® (CHARACTER [DEL] button). The title will
disappear from view, but it is retained in title
memory.
• Title deletion is possible only during recording.
If you wish to display the title after deleting it,
press the camera's start/stop button again to
place the camera in the record pause mode. The
title and cursors which denote blank spaces will
reappear (the left cursor will be blinking).
• If you don't wish to record the title the next time
you shoot, switch the title mode to the EVF infor¬
mation mode with the mode select button.
• The constructed title will be retained even if
recording is stopped, the viewfinder display is
changed to another mode (such as the EVF in¬
formation or stopwatch mode), the camera is
set to standby, or the recording is played back
in the viewfinder, as long as the recorder's VTR
switch is set to ON and the camera cable is
connected.
Advertisement
Table of Contents
