Remove and Replace AKD-5—Existing Door
Ensure only qualified personnel install, operate, service, and maintain all electrical
equipment.
1. To remove existing compartment door(s), refer to your manual on how to remove the legacy doors.
2. To install new door, refer to the
45 EntelliGuard R Circuit Breaker Retrofill AKD-5 Installation Manual
It must be ensured that the supply power to
the compartment is turned off/
compartment is de-energized for all the
incoming and outgoing circuits of the LVS
prior to any work being conducted on it.
During the installation and related work on
the equipment, it must be ensured that the
operator is using the prescribed PPE for the
specified tasks.
Retrofill Door Assemblies,
DEH-41563.
DEH-41547