Remove And Replace Akd-5-Existing Door - ABB AKD-5 Installation Manual

For the retrofill, instructions for installing the interlocking system on the AKD-5 switchgear are the same as those for
EntelliGuard G Circuit Breaker. Install the Door Interlock Lever and torsion spring with an E-ring on pins already found
on the cassette side frame. Install the door bracket to holes already located in the retrofill door. For more detailed
instructions, refer to the
41304.
Remove and Replace AKD-5—Existing Door
• Ensure only qualified personnel install, operate, service, and maintain all electrical
equipment.
1. To remove existing compartment door(s), refer to your manual on how to remove the legacy doors.
2. To install new door, refer to the
32 EntelliGuard R Circuit Breaker Retrofill AKD-5/6 Installation Manual
Installation, Operation, and Maintenance Manual for the EntelliGuard G Circuit Breaker, DEH-
Retrofill Door Assemblies,
• It must be ensured that the supply power to
the compartment is turned off/
compartment is de-energized for all the
incoming and outgoing circuits of the LVS
prior to any work being conducted on it.
•
During the installation and related work on
the equipment, it must be ensured that the
operator is using the prescribed PPE for the
specified tasks.
DEH-41563.
DEH0005240 R01