Table of Contents
Advertisement
DR-E34BK
DR-E34LBK
OPERATION WITH
THE REMOTE
CONTROL UNIT
How to use CD/TUNER
10 KEYs
TUNER 10 KEYs
1. Press TUNER button @).
2. Pres 10 KEYs.
® if you have preset a station, you can tune it
in instantly by pressing the preset channel
number. (Presets are performed on the main
unit. See page 10.)
CD 10 KEYs
1, Press CD 10 KEY button ©.
2. Press 10 KEYs.
# The 10 KEYs will work as CD 10 KEYs. giv-
ing you random access to your favorites on
a CD. Also used to vary the length of tape
during edit recording.
How to use CD changer
¢
Use this when operating CD auto changer.
1. Press the CD changer BUTTON @.
2. Setect CONTINUE /8:; or PRGM [9? button
and press it.
3. Using DISC SELECT ([1]- [6]) button,
specify the disc number.
Note:
¢
When
specifying
a song
number,
use
AUTO SEARCH (¢q ) or (PP) button, or
CD 10 KEYs.
¢
Also read carefully the instruction manu-
al of the CD auto changer.
Instructions for Use
@ POWER
¢ Turn ON the power to the main unit or let it
stand by.
@ FADE MUTING
Spin the VOLUME
dial for a lower sound
volume, depending on how many times you
press this button.
@ VOLUME
[+]:
Press to increase the sound volume.
Press to reduce the sound volume.
@ TUNER
¢ Press to tune into broadcasts by using the
10 KEYs as TUNER 10 KEYs.
® CD 10 KEY
« Press to use the 10 KEYs as CD 10 KEYs.
© CD/TUNER 10 KEYs (/1]—([10:,. +10!)
e The 10 KEYs can be used as TUNER or CO
10 KEYs.
DISC SELECT
('1! —
[6/) (CD auto
changer only)
¢ Press it when specifying a disc number of
CD auto changer.
@ CD CHANGER (CD auto changer only)
© To operate CD auto changer, press this but-
ton first.
CONTINUE
[8 | (CD auto changer only)
* Press to play CD continuously.
PRGM [9] (CD auto changer only)
e Plays CD in programmed order.
@ CD controls
cDLP>
Starts playing a disc.
STOP | HM:
Stops playing a disc.
AUTO SEARCH ike}:
Scans a disc back-
ward,
AUTO SEARCH
|[PPi}:
Scans a disc for-
ward.
* Disc are scanned continuously while these
buttons are pressed continuously.
1-8 (No. 20162)
DECK A CONTROL
>
LP /: Plays tape.
| Mi:
Stop tape.
[<4]:
Fast-winds a tape to the iett.
[bP]:
Fast-winds a tape to the right.
@ DECK B CONTROL
[>]:
Plays the front side of a tape.
[<4]:
Plays the reverse side of a tape.
REC [0]:
To start tape recording, press
the [<4] or LB _] button while holding down
this button.
© Muting is operable from the main unit.
PAUSE (|:
Pause playback or record-
ing.
Press this button and the REC [_O | button
at the same time to enter the REC PAUSE
mode.
¢ To resume
playback or recording, press the
[EJ
or ta] button.
The [<<], [PP], and[_@ | buttons operate
the same as those in DECK A CONTROL.
Source selector controls
@ PHONO
Press to listen to a record.
@ AUX
Press to listen to the sound from the source
plugged into the VIDEO/AUX jack.
DESCRIPTION AND
FUNCTIONS
Tuner section
@ MEMORY indicator
@ TUNED indicator
© STEREO indicator
© FM/AM indicator
FM" or "AM" lights as an FM or AM broad-
cast is being received.
© Frequency/channel indicator
This indicator normally shows a frequency
It displays a channel number when PRESET
SCAN
button is pressed. When a 10 KEY
(preset stations) is pressed, it displays a chan-
nel number for about 2 seconds and returns
to a frequency display.
© MEMORY
@ AUTO MEMORY
@ TUNING (UP/DOWN)
Use to tune in an FM or AM broadcast.
(See *2, page 9.)
UP:
Use to increment the tuned-in frequency.
DOWN:
Use to decrement the tuned-in fre-
quency.
@ FM
@ AM (DR-E34BK) AM (MW/LW) (DR-E34LBK)
@ 10 KEYs (Preset stations)
See ''How to use 10 KEYs,"' page 6.
@ PRESET SCAN
Amplifier section
@ POWER (ON/STANDBY)
Turns the power ON or activates the STAND-
BY mode.
STANDBY mode:
Preset data is retained in memory whiie the
power cord is plugged into an AC outlet. Ifa
power failure occurs or the cord is unplugged.
data is retained for one or two days before
memory is cleared.
Note:
¢ Asmall amount of power (9 watts) is con-
sumed in the STANDBY mode. To switch
the power off completely, unpiug the
power cord.
@ Source selectors and indicators TAPE,
PHONO,
TUNER,
CD, and VIDEO/AUX
@ PHONES jack
Plug headphones into this jack.
Note:
* Plugging in headphones switches off the
sound from the speakers.
@ REMOTE SENSOR
This sensor detects the signals transmitted from
the remote control unit.
@ RECEIVED indicator
Lights when this unit receives signals transmit:
ted from the remote control unit.
POWER STANDBY indicator
Lights when POWER is STANDBY MODE.
@ VOLUME
@ BALANCE
Balances the sound volumes of the left anc
right speakers, Normaily, leave this knob at the
center (click) position
S.E.A. GRAPHIC
EQUALIZER
Sec-
tion
@ LEFT CHANNEL
@ RIGHT CHANNEL
Cassette Deck section
@ PUSH OPEN and Cassette holder (Deck A)
@ DOLBY
B NR
and
indicator
(See
°*3,
page 9.)
@® CD DIRECT REC
Press this button to directly record a compac:
disc on tape deck B.
© REVERSE MODE C-_) button and indicator
@ PUSH OPEN and cassette holder (Deck B)
@ TAPE RUNNING INDICATORS
Show the status of tape running.
@® Deck A operation buttons (PLAY)
(<4):
Fast-winds tape to the left.
(>):
Fast-winds tape to the right.
( > ):
Plays tape.
( M ):
Stop tape.
@ Deck B operation buttons (REC/PLAY)
{ D> ):
Plays the front side of tape.
(<1):
Plays the reverse side of tape.
The (<4),
(>B ), and ( M™ ) buttons oper-
ate the same as those in deck A.
@ HIGH SPEED DUBBING (A PP
8B)
REC/REC MUTE ( © ) and indicator (deck
B only)
The indicator lights while recording
is in
progress and flashes while it is muted.
PAUSE ( Wf ) (deck B only)
Pauses playback or recording.
Advertisement
Table of Contents
