Panasonic PAW-160MAH3M Installation Instructions Manual page 62

Electrical Wiring
Terminal No.
X6
AO1 X6.1
l
AO2 X6.2
l
l AI1 X6.3
AI2 X6.4
l
T/D1 X6.5
l
l T/D2 X6.6
COM X6.7
l
DI1 X6.8
l
l DI2 X6.9
DI3 X6.10
l
COM X6.11
l
l DO2 X6.12
COM X6.13
l
DO1 X6.14
l
5
OT1 to OT6 work only with PACi NX outdoor units.
Terminal layout – CZ-CAPBC2 / ACC-SP1A
For information on the terminal layout of CZ-CAPBC2 / ACC-SP1A see →
out – CZ-CAPBC2 / ACC-SP1A, p.
62
Allocation Function
4 – 20 mA Higher potential
Analogue output terminals
4 – 20 mA Lower potential
0 to 10 V DC Higher potential
Analogue input terminals for temperature and demand
control
0 to 10 V DC Lower potential
No polarity
Activation of demand control
No polarity
Lower potential for DI1 to DI3
Digital Inputs
Digital Input 1
(For information on functionality refer to section
Higher potential
"Terminal layout – CZ-CAPBC2 / ACC-SP1A" in this
Digital Input 2
document or in the dedicated installation instruction of
Higher potential
CZ-CAPBC2)
Digital Input 3
Higher potential
COM for DO2
Alarm Signal
Alarm Signal
COM for DO1
Operation Signal
Operation Signal
58.
AHU Kit – Installation Instructions – 07/2023
Description
Analog output (Room temperature monitor), Indoor temperature
monitor output. Output current : 4 to 20 mA. Temperature indica-
tion range : 5 to 36 °C, 0.5 °C step
Analogue input (+10 V DC) for demand control / temperature
control
Analog input Negative potential (–10 V DC) for demand control /
temperature setting
Insert bridge to activate temperature control (system is set for
demand control as standard)
2 types of usage:
a) Potential-free:
Keep S3 of CZ-CAPBC2 / ACC-SP1A on "NON VOLTAGE".
b) 12 to 24 V DC, 10 mA external:
Change S3 of CZ-CAPBC2 / ACC-SP1A to "VOLTAGE".
External Potential: max. 230 V AC / 3 A
External Potential: max. 230 V AC / 3 A
5.3 Terminal board lay-