Yamaha QX5 Owner's Manual page 59

QX5 QUICK REFERENCE MANUAL
RECORD
* Recording is always on Track 1.
* Track 1 must be on.
* Memory Protect must be off.
* To record, press
RECORD] then [START or CONTINUE
(From measure 1) (From current measure)
RECORD MODE
* There are three modes.
Realtime
+(RECORD] »
Punch In
Step
* When Auto Locate is on, recording starts from the left
Measure Memory.
Me *
MEASURE=0027-01
=- [START] [save 010 015 oza
(from this measure)
PUNCH IN RECORD
* Set Punch In/Out points to the current measure.
Select measure (<j t>)
[MEASURE] MEASURE=0027-01
MEASU E » Save 010 015 024
HIFT] + m—
SHIFT] + Punch Out En
HIFT) + Punch In
STEP 70
[Fox anon iile
STEP RECORD
* Press DISPLAY to show Free Memory or Position.
Measure Beat Clock
M=0001~-01-00/96
1/04 080% 064
Step Time
Gate Time
Velocity
Free Memory
[CURSOR]
La) =)
* Input notes from a MIDI instrument.
Select parameter (Position, Step
Time, Gate Time, Velocity)
Change parameter
Erase the previous event.
MEASUR Move back one event.
TRACK] Extend timing of previous note.
[CLOCK] Input rest.
[SHIFT] + [IEMPO] Delete one measure.
(SHIFT]+(TRACK] Insert a Measure End mark.
([SHIFT]+[CLOCK]
Rest untit end of measure.
(AUTO LOCATE] Protect Step Recorded data.