Start Recording - Yamaha QX5 Owner's Manual

Clock
Track 1 On
Realtime Record
Metronome
START RECORDING
Press and the display will show "OUTPUT ASSIGN." In the same way you
did with Input Assign, make sure the far left number is "1".
co. 2>OUTPUT ASSIGN
= 23456789 1011 12 13 1415 16
We will set the QX5 clock to [INTERNAL]. Press [CLOCK] and then [F4]. The
display will show "CLOCK IN=INT" or "C=INT."
cock —— CLOCK IN=INT „| T5120 M=0001-01
— * Tape Midi Int] |P=*x....... C=INT
F3 E3
For us to record on track 1, it must be turned on. Press [TRACK] and then
to make "1" or "*" appear. (Each time you press [F1], "1" or "*" will alternate
with ".")
a | es PLAY TR=%*....... T=120 M=0001-01
or
TRACK EDIT JOB Trl Tr2 Tr3 Tr4
While holding down [SHIFT], press [REC MODE]. Each time you press
(REC MODE], the display will move between "REALTIME", "PUNCH IN", and
"STEP." Make it read "REALTIME."
RECORD
alla REALTIME 250
j
REC MODE
While holding down [SHIFT], press [CLICK] to turn the metronome on or off. (If
it's too fast, or sounding in a strange time signature, just leave it off. We will explain
how to set this later.)
SHIFT DISPLAY
CLICK
When you selected the recording mode, the Record LED came on. Pressing
START] will begin recording. After a two-measure countdown, anything you play
will be recorded. Play 20 or 30 measures so that we have something to work with.
Ready to record
REALTIME 250
T=120 M=0001-01
RECORD
Ll
REC MODE
— Countdown Begin recording
REALTIME 250 REALTIME 249
T=120 COUNT=08 T=120 M=0001-01
ENTER
When you have played enough, press [STOP/CONTINUE]. Both LEDs will go off.
10