Yamaha QX5 Owner's Manual page 22

21
Execute
EVENTS
Note
Aftertouch
Pitch Bend
Control Change
Changes you make are not permanent unti! you Delete, Insert or Replace. To Delete
the selected event, press [SHIFT] + [RECORD]. To Insert the modified event at
the current timing, press [SHIFT] + [STOP]. To Replace the selected event with
the modified event, press + [START]. (None of these operations will affect
the timing of other events.)
Delete Insert Replace
STOP/ START
RECORD CONTINUE
SHIFT SHIFT SHIFT ;
REC MODE ENTER
You will encounter 10 types of events in Event Edit.
Note events are displayed as follows. Notice that the cursor has an "extra space
to move" to change Gate time.
M=0002-01-24/96
M=0002-01-24/96
NOTE (1) E..2 025] |NOTE (1) 00016
Channel 1-16 Note Velocity 1-127 Gate time 0 -16380
C-2 - D#7
Gate time is the length of the note in "clocks" or 1/384 notes. It can be modified
in steps of 4. Pressing — while holding [SHIFT] will move in steps of 100.
Aftertouch (Common and Individual) events are displayed as follows.
Common Aftertouch Individual Aftertouch
M=0002-01-24/96 M=0002-01-24/96
(1) COM 127
(1) C.-2 127
Channel 1-16 Common Data Channel 1-16 Note Data
The Aftertouch on the DX7, KX88, etc. is Common Aftertouch, where a single
Aftertouch valve is sent for the whole keyboard.
ku
Pitch Bend events are displayed as follows. <<
M=0002-01-24/96
P. BEND (1) -8192
Channel 1-16 Data -8192 - 8191 *
The above display indicates that the Pitch Bender has reached the lowest position. P
By pressing «r> + [SHIFT], you can change the Pitch Bend data in steps of
100.
Control Change events are displayed as follows.
M=0002-01-24/96
CNTL (1) 001 127
Channel 1-16 Control no. 0 - 121 Data 0-127