Yamaha QX5 Owner's Manual page 38

5. MIDI RECEIVE
6. SETUP STORE
7. SETUP RECALL
37
This is where you can receive QX5 sequence data in the form of a MIDI System
Exclusive message from an external data managing device or another OX5/7/21.
As with MIDI Save, you can specify the channel. (The transmission and receiption
channels must match, or the data will not be received.) As with Tape Load, you
can specify how the data is to be loaded (see p. 35).
S>MIDI RECEIVE
CHO1 ALL
Channel 1-16 All, Floating, TR1 .. M32
When you press [START], the QX5 will send a Dump Request message and wait
for Sequence Bulk data to come. When the data begins arriving, the display will
show the track or macro being received, just as in Tape Load (p. 35).
You can store most of the OX5 settings in one of 4 memories for quick recall. A
Setup Memory contains all settings in Setup (p. 38), MIDI 1 (p. 41) and MIDI 2
(p. 44). In addition, it contains the Clock In and Out settings (Int, MIDI or Tape).
It does not contain Tempo and Measure Memories or Track On/Off settings. To Be,
store the current settings in a Setup Memory, use «1> to select the memory =
number (1-4) and press [START]. After briefly displaying "Executing", the current
setup will be saved in the specified memory. There is a Setup Memory chart on
p. 40.
6> SETUP STORE
4
Setup Memory 1-4
Use this to recall a setup you have saved in Setup Store. Use «a> to select the
setup you want (1-4) and press [START]. The setup will be recalled into memory.
7>SETUP RECALL
4
E)