Yamaha QX5 Owner's Manual page 32

3. TR. DOWN
4. CLEAR
§. CUT
6. INSERT
Track Down (mix) the contents of two tracks. The contents of both tracks will be
put into the second track. If the measure markings of the two tracks are different
(eg. one is in 3/4 time and the other is in 4/4 time), the measure markings of the
lower numbered track will be used.
3>TR. DOWN 191
TR1 (05) TR2 (08)
Erase the contents of a track or macro.
4>CLEAR 191
TR4 (25)
This cuts track 1 at the beginning of the specified measure, and puts the deleted
part in another track (2-8). If DELETE is selected instead of track 2-8, the deleted ~
part will be discarded. The old data in the specified track (2-8) is lost.
191
TR2 (03)
Measure
Executing the above example would Cut track 1 at measure 7 and put the "tail"
in track 2.
Measure 1 7 10 1 7
Tracki
YZZ
PLA
4
Insert track 1 into another track (2-8) in front of the specified measure. Track 1 d
remains the same. *
6>INSERT 191
0007 TR2 (03)
Measure
Executing the above example would change the tracks as follows.
Measure 1 4 7 10
Track 1
Track 2