Table of Contents
Advertisement
2. Move the throttle lever to the Slow position, stop the
engine, remove the key, and wait for all moving parts to
stop before leaving the operating position.
3. Raise the front of the machine and support it on jack
stands.
4. Remove the fasteners securing each roller on your
mower deck, and move the rollers up or down as
desired; refer to
Figure 24
applicable for your mower.
Figure 24
All mower decks
1. Front roller
Figure 25
Guardian mower decks only
1. Bolt
2. Rear under-deck roller
3. Spacer
through
Figure 28
as
2. Roller shaft
4. Nut
5. Bracket
Guardian mower decks only
1. Bolt
2. Front under-deck roller
Side-discharge mower decks only
1. Bolt
2. Chute-side roller
3. Spacer
28
Figure 26
3. Nut
4. Bracket
Figure 27
4. Nut
5. Bracket
Advertisement
Table of Contents
