Using With Analog Video Unit And Pc; Signal Convert Fimction - Sony DCR-TRV6 Operating Instructions Manual

Using with analog video unit and PC -
Signal convert function
You can convert analog video signals into digital video signals via your camcorder
connected to a PC and analog video trait.
Analog video signals -+ Digital video signals
You can capture images and sound fl'om an analog video trait connecting a PC which
has the i.LINK (DV) jack to your camcorder.
(1) Set the POWER switch to VCR.
(2) Set DISPLAY in _ to LCD in the menu settings.
(3) Set A/V ---+DV OUT in _ to ON in the menu settings.
(4) Start playback on the analog video unit slightly ahead of the point fl'Oln which
you want to start capturing images.
(5) Start capturing procedures on your PC. The operation procedures depend on
your PC and tile software which you use.
For details on how to capture ilnages, refer to the instruction manual of PC and
software.
VCR
@ S VIDEO
® VIDEO
.%OD,O
: Signal flow
[, DV IN/OUT
After capturing images and sound
Stop capturing procedures on yotu PC, and stop tile playback on tile analog video unit.
Notes
• You need to install software which can exchange video signals.
• Depending on the condition of the analog video signals, the PC may not be able to
outi)ut tile images correctly when you convert analog video signals into digital video
signals via your camcorder. Depending on tile analog video unit, tile image may
contain noise o1"incorrect colors.
66