Sony DCR-TRV6 Operating Instructions Manual page 54

-- Editing --
Dubbing a tape
Using the AJV connecting cable
Connect your eameorder to tile VCR using tile A/V connecting cable supplied with
your Call-lcorder.
Set the input selector on the VCR to LINE, if available.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Prepare the VCR fur recording, then set the input selector to LINE.
Refer to the operating instructions of the VCR.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR. ReDr to the operating instructions of your VCR.
AUDIO/VIDEO
IN
S VIDEO
_ @ VIDEO
®TAUalO
® _
VCR
: Signal flow
When yo,, have finished d,,bbing a tape
Press • on both your cameorder and the VCR.
Before a dubbing
Set DISPLAY to LCD in the menu settings. (Default setting is LCD.)
Be sure to clear the indicators from the screen
If they are displayed, press tbe fbllowing buttons not to record the indicators on the
dubbed tape:
• Tbe DISPLAY button
• The DATA CODE button
• The SEARCH MODE button on the Remote Commander
You can edit on VCRsthat support the following systems
[] 8 ram, Hig Hi8, [VgS VHS, SlVgS,S VHS, Vtl_51_ V HSC, S/VItSI_S VHSC,
rfl Betamax, _ ED Betamax, _"1_" mini DV, 1}_"DV, |) Digital8
If your VCR is a monaural type
Connect tbe yellow plug of the A/V connecting cable to tbe video inputjack and the
wbite or tbe red plug to the audio input jack on the VCR or the TV. When tbe white
plug is connected, the left channel audio is output, and the red plug is connected, the
right channel audio is output.
54