Sony DCR-TRV6 Operating Instructions Manual page 28

Viewing the recording on TV
Connect your camcorder to your TV or VCR with tile A/V connecting cable supplied
with your camcorder to watch the playback picture on the TV screen. You can operate
the video control buttons in the same way as when you monitor playback pictures on
the LCD screen. When monitoring tile playback picture on tile TV screen, we
recommend that you power your camcorder fi'om a wall outlet using the AC power
adaptor (p. 14). ReDr to the operating instructions of your TV or VCR.
Open the jack cover. Connect your camcorder to the TV using the A/V connecting cable
supplied with your camcorder. Then, set the TV/VCR selector" on the TV to VCR.
,._a,,.. : Signal flow
AUDIO/VIDEO
IN
@ S VIDEO
® VIDEO
)UDIO
Connect your camcorder to the LINE IN input on the VCR by using the A/V connecting
cable supplied with your camcorder. Set the input selecto_ on the VCR to LINE.
Connect the yellow plug of the A/V connecting cahle to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. If you connect the
white plug, the sotmd is L (left) signal. If you connect the red plug, the sound is R
(right) signal.
If your TV or VCR has an S video jack
Connect using an S video cahle (not supplied) to obtain high quality pictures. With this
connection, you do not need to connect tbe yellow (video) plug of the A/V connecting
cable.
Connect the S video cable (not supplied) to the S video jacks on hoth your camcorder
and the TV or the VCR.
This connection produces higher quality DV format pictures.
28