Table of Contents
Advertisement
27-2
Electricity charge apportionment main screen
Performs electricity charge apportionment setting.
Electricity charge apportionment main screen
(The screen is in the unset state. The contents which can be selected vary depending on the setting)
Function lock
„
„
Only the user that started the electricity charge apportionment main screen for the first time can use
the electricity charge apportionment function.
If another user attempts to open the electricity charge apportionment main screen while the electricity
charge apportionment function is being used, the message shown below is displayed.
[Reference Only]
Displays the electricity charge apportionment main screen in the locked state. (Only the [OK] button is
enabled)
[Cancel]
Ends the electricity charge apportionment function without displaying the electricity apportionment
main screen.
Note
When performing electricity charge apportionment setting by remote connection, required time varies
depending on the network communication speed. To avoid this, perform electricity charge apportionment
setting on server PC preferably.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
To display this screen, click main screen menu
→ "Data" → "Electricity Charge Apportionment".
249
Advertisement
Table of Contents
