Table of Contents
Advertisement
25-1
Energy saving group setting
Manage energy saving group.
Add or delete the indoor units for created energy saving group. (Multiple registration is not allowed)
Indoor units registered in energy saving group would be:
●
An object of indoor unit rotation operation. It can set downtime ratio in each energy saving group.
●
An object of temperature shift and forced thermostat-OFF of peak cut operation. Temperature shift pat-
tern can be set for each energy saving group.
●
Belonging refrigerant system would be an object of outdoor units stop by peak cut operation.
To the extent possible, set Energy Saving Group by room (or by separated spaces).
Make each Energy Saving Group includes as many indoor units as possible.
Do not include the indoor units that are out of the control scope of Peak Cut Function in an Energy Saving
Function.
To display this screen, select main screen menu → "Setting" → "Energy Saving Group Setting".
5
Select work term from tool bar.
Create a new energy saving group. (Max1600).
A new name can be input for a selected energy saving group. (20 characters or less, alphabet, digit,
symbol)
Delete the selected energy saving group or release the selected indoor units from energy saving group.
This function is the same with Remove button of 5.
Note
●
The action item on tool bar can be operated equally even right click mouse on the indoor units in
Current energy saving groups and indoor units registered under them will be displayed hierarchically.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
223
.
Advertisement
Table of Contents
