Table of Contents
Advertisement
23.
Creating an Electricity Meter System
Configure the connection structure of the electricity meter and air-conditioner units connected to those un-
derneath it. Configure according to the actual electricity meter installation condition.
Since the Electricity Charge Apportionment function has a function that uses and controls electricity con-
sumption information from the electricity meter, it is necessary to configure the electricity meter system.
Select main screen menu → "Setting" → "Electricity Meter Zone Setting"
5
Select work term from tool bar.
Displays the "Create Electricity Meter Zone" screen. Up to 200 electricity meter sys-
tems can be created.
At electricity meter system selection, this button becomes active and the "Create Elec-
tricity Meter Zone" screen is displayed by pressing the button.
At electricity meter system selection, the electricity meter system is deleted and all the
units allocated under it are removed.
At unit selection, unit allocation is removed.
Multiple electricity meters and units can be selected and deleted.
Note
●
The action item on tool bar can be operated equally even right click mouse on the indoor units in
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
211
.
Advertisement
Table of Contents
