Table of Contents
Advertisement
575555
Extended operation
Sets the extended operation for detail operation of the air conditioner.
The extended operation screen is displayed from the Operation Setting screen by [s] button.
Setting contents/temperature input
Air Flow Direction setting
Sets the Air Flow Directions.
1. Set an arbitrary angle using the [v], [
To set to automatic, select [Swing].
Louver Vertical: Vertical Air Flow Direction setting
Louver Horizontal: Horizontal Air Flow Direction setting
*
When Air Flow Direction setting is disabled, N/A is displayed and setting is impossible.
Upper/lower temperature limits setting
When upper/lower temperature limits setting is performed, "Set Temp." can only be changed within
that set range.
Perform upper/lower temperature limits setting.
1. Click [Enable] button.
2. Enter the set temperature range in the modes of Cool, Dry, Heat, and Auto.
Set by direct numeric input or by [v] and [
Upper limit: Upper limit set temperature
Lower limit: Lower limit set temperature
*
Only the necessary modes can be set.
Setting is possible only with of the V-II/V-III/VR-II/J-II/J-IIS Series.
Cancel upper/lower temperature limit setting.
Click [Disable] button.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
Extended display state
], [<], and [>] buttons.
Λ
] buttons. (0.5 degree increments)
Λ
170
Switch to standard display by [] button.
Extended operation part
Advertisement
Table of Contents
