Toshiba GR-200-5 Instruction Manual page 392

Settings using GR-TIEMS
(i)
Figure 3.4-9 shows how to connect the reset signal LED_RST_CMD for the LED-03 logic. The
user can assign a reset signal for the respective LED logics by the drag and drop operation.
The user should also select Latch for the behavior from the pull-down menu.
Set [Behavior] to Latch
Figure 3.4-9 Settings for LED-03 circuit provided by "Setting I/O menu" of GR-TIEMS
Settings using IED screen
(ii)
The operation from the IED screen can also be set. See Chapter
menu
(→p. 1010).
- 372 -
6F2T0207 (0.01)
Choose the signal
LED_RST_CMD for the
LED-03 logic
User interface: I/O setting sub-
GRE200 (5,6)