Panasonic EBL512 G3 Operating Instructions Manual page 41

EBL512 G3 V. 3.0.X - FIRE ALARM SOLUTIONS OPERATING INSTRUCTIONS
TEST MODE ALARM
Regarding Test mode, see chapter on page 87 and
27. PERFORM MONTHLY TEST (H1) 33. PERFORM ZONE TEST (TEST MODE)
on page 114.
(H7)
When an alarm point in a zone set in test mode is tested, it is presented in the display as a fire alarm but with the information "Test
mode" added. If a printer is available the test mode alarm will be printed with the information "(test mode)" added.
No outputs will be activated except the fire door outputs. The test mode alarm will be automatically reset after approximately 10
seconds.
41