Setup; Mounting The Battery Charger (Optional); Filling The Chain Saw With Bar And Chain Oil; Product Overview - Toro Flex-Force Power System 51850 Operator's Manual

Setup

Important:
The battery pack is not fully charged
when it is purchased. Before using the machine
for the first time, refer to
Pack (page 19).
Mounting the Battery
Charger (Optional)
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to Figure 1 for assistance in mounting the
charger.
Slide the charger over the appropriately positioned
hardware to secure the charger in place (hardware
not included).
Filling the Chain Saw with
Bar and Chain Oil
Important:
Use only bar and chain oil (sold
separately).
Fill the chain saw with bar and chain oil; refer to
Checking the Oil Level and Adding Bar and Chain
Oil (page 20).
Charging the Battery
Figure 4

Product Overview

1. Chain
2. Guide bar
3. Oil window
4. Oil cap
5. Front handle
g290534
1. Chain brake
2. Side cover
3. Captive cover nut
1. Battery charger Model
88620 (included with
Model 51850)
10
Figure 5
Left side shown
6. Battery pack
7. Button latch
8. Trigger lock
9. Trigger
10. Bucking teeth
Figure 6
Right side shown
4. Multitool (located beneath
rear handle)
5. Chain tensioning screw
6. Guide bar cover
Figure 7
2. Battery pack Model 88625
(included with Model
51850)
g315699
g315700
g355813