ENACFIRE E90 - Wireless Earbuds Manual

Packaging List

Product Overview

Power On & Pairing

Approach 1 -With Charging Case

Take out earphones from the charging case

Select 'ENACFIRE from Bluetooth list

Approach 2 - Without Charging Case
Power On: Touch the earphones for 2 seconds Prompt sound 'Power on'
Pairing: Right earphone Blue and White light flash
Select 'ENACFIRE E90'
Note: Right earphone is the master earphone

Incoming call

Answer call/End call
Tap the Left/ Right earphone once

Reject call
Touch the Left/ Right earphone for 2 seconds

Music

Pause / Play
Tap the Left/ Right earphone once

Voice Assistant
Tap the Left/ Right earphone 3 times

Change Song
Double-tap the Left/Right earphone

Adjust Volume
Touch and hold the Left/Right earphone

Power Off

Mode 2-Without Charging Case
Turn off Bluetooth to disconnect the earphones
Touch either one earphone for 8 seconds to power Off both earphones

Single Mode

Game Mode

Game Mode On; Tap Left/ Right earphones 4 times with prompt sound: Game mode
Game Mode Off: Tap Left/Right earphones 4 times with prompt sound: Game off

Charging

Earphones:
Open and close the charging case cap, wait for 3 seconds The leftmost/rightmost LED light on; Left/Right earphone is charging LED light off: Fully charged
Note: It takes about 1.5 hours to fully charge the earphones

Charging Case:
Put the earphones back to the case Lights on charging case stand for the remaining battery capacity
Note: It takes about 1.5-2 hours to fully charge the charging case

Safety Instruction

Using earphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised that you keep volume levels moderate to low at all times for your safety. Do not use while driving, cycling, operating machinery or performing other activities that require hearing surrounding sounds.
Do not use earphones in thunderstorm weather, the earphones may not work properly in the bad weather condition, and may increase the risk of being hit by lightning.
Earphones may not work properly under high temperature or high humidity conditions.
Do not use any corrosive cleaner/oil to clean the earphones. If the earphones come in contact with liquids, quickly wipe away. If submersed in the water, do not turn the earphones on until it is completely dried.
Tips: Man-made damage and lost are not covered under warranty. Keep the earphones and the packaging out of reach of children.

Customer Support
support@enacfireglobal.com (US/CA)
moongu@enacfireglobal.com (UK)
desupport@163.com(DE)
esenacfire@163.com (ES)
enacfirefr@163.com (FR)
itenacfire@163.com (IT)
We will reply to you within 24 hours and 1 00% solve your issues