ENACFIRE Future Plus - Wireless Earbuds Manual

Start

Packaging list

Product overview

1. Charging port
2. USB port
3. Charging case LED light (white light)
   
4. Earphones LED light
5. Multifunction button
6. Talking mic
7. Acoustic hole
8. L/R logo
9. Magnetic charging contact pins

Wearing

Step 1: Choose the suitable eartips.

Step 2: Wear it in the ear and adjust to a comfortable position (please note the left and right earphones).

Power On

Mode 1

Take out the earphones from the charging case and they will power on automatically, At this time, the blue LED is on for I second.

Mode 2

Please make sure the earphone has been turn off, press and hold the multifunction button for 2 seconds. Then release when you hear the prompt sound 'Power on', the blue LED light Will flash for 1 second at the same time.

Pairing

Mobile phones and earphones

Mode 1: Take out L/R earphones from the charging case, The two earphones Will automatically pair each other, Then L earphone will automatically enter into the pairing status when blue and white lights flash alternately. Select and click "Future Plus" from the Bluetooth list of the mobile phone.

Mode 2: If the charging case is not around, follow POWER ON MODE 2 's method Of operation, the two earphones Will be activated and pair each other.

Note: Left earphone is the master earphone.

Connection lost

Mode 1: Device Bluetooth Function off
If the Bluetooth function of mobile phone is turned off, earphones will be disconnected. After 5 minutes of reconnection timeout, the earphone will power off automatically.

Mode 2: Out of connection distance
If the connection between the phone and the earphones exceeds the effective range. The earphone will power off automatically after 5 minutes of reconnection timeout.

Incoming call

Answer a call/End a call

Press multifunction button of L earphone once.

Reject a call

Press multifunction button of L earphone twice

Note: When receiving a call
Only the Left earphone can her the voice In Stereo Mode.
The L/R earphone could hear the voice In Mono Mode.

Music

Pause

Press the multifunction button once to pause music in the music mode. (Some phones may require you to start a media player first).

Play

Press the multifunction button once to play in the music mode. (Some phones may require you to start a media player first).

Next song

Double-press the multifunction button of the R earphone to play the next song in the music mode.

Note: This function Is not supported when L/R headphones are used alone.

Previous song

Double-press the multifunction button of the L earphone to play the previous song in the music mode.

Note: This function Is not supported when L/R headphones are used alone.

Mono and stereo mode

Mono mode

1. Take out one of the earphones from the charging case. Press the multifunction button for 4 seconds until the light Of earphone changes white, The earphone is OFF.
2. Press and hold the multifunction button for 4 seconds until the blue and white lights flash alternately.
3. Turn on the mobile phone bluetooth list, select and click 'Future Plus", and complete the mono mode.

Stereo mode

1. Put the L/R earphones into the charging case,
2. Take out L/R earphones from the charging case. the two earphones will automatically pair each other.
3. Turn on the mobile phone Bluetooth list. select and click "Future Plus". and complete the stereo mode.

Power Off

Mode 1

Put the earphones into the charging case and it will shutdown automatically and the white LED lights up.

Note: Put the left earphone Into the charging box separately, the right 'earphone will automatically enter the pairing status; Put the right earphone back Into the charging box separately, and the left 'earphone can be used normally.

Mode 2

When the earphone is ON, press and hold the multifunction button for 4 seconds. The white LED light will be on for 1 second.

Charging

Earphone charging

Put the earphones into the charging case.

Charging: LED stays on white.
Fully charged: The LED light is off.

Tips: It takes about 1.5 hours to fully charge the earphones.

Charging case charging

LED status when the charging case is being charged

(1/3)
When the battery is 1/3 charged, one LED light is on.

(2/3)
When the battery is 2/3 charged, two LED lights are on.

(Fully charges)
When the battery is fully charged, all three lights are on.

Please charge the charging case when the first LED light is flashing (low battery).

Q&A

Q: Why the charging case is unable to be used to charge my mobile phone when tie first LED light is still on?
A: It needs greater amount of battery power to charge the mobile phone as compared to the earbuds. When the first LED light of charging case flashes, it indicates the battery is running out but still sufficient to charge the earbuds.

Q: Why the music cuts In and out sometimes?
A: Please make sure there is no obstacle between Enacfire earbuds and your mobile phone.
Please make sure there is no Microwave oven / wifi transmitter around you, which are more likely to produce electromagnetic interference and result in signal interruption.
Note: Please keep your phone and the master earphone (L) as close as possible, ensure more stable bluetooth connection.

Q: How to contact ENACFIRE Customer Service Team?
A: If you have any issue with the product, please contact us via support@enactireglobal.com (LIS/ CA) / moongu@enacfireglcbal.com WK). We will reply to you within 24 hours and 100% solve your issue.

Safety Instruction

Using earphone at high to moderate volumes for extended periods of time will result in permanent hearing damage, It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery or performing other activities that require hearing surrounding sounds. Do not use earphone in thunderstorm weather, the earphone may not work properly in the bad weather condition, and may increase the risk of being hit by lightning.
Earphone may not work properly under high temperature or high humidity conditions.

Do not use any corrosive cleaner/ail to clean the earphone. If the earphone comes in contact with liquids. Quickly wipe away. If submersed in the water, do not turn the earphone on until it is completely dried.

Tips: Warranty void If the earphones submersion In the water
Keep the earphones and the packaging out of reach of children.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ENACFIRE Future Plus - Wireless Earbuds Manual