ENACFIRE Future - Wireless Bluetooth 5.0 Earbuds Manual

Start

Packing list

Product overview

1. Charging port
2. Charging case LED light (white light)
3. Earphones LED light
4. Multifunction button
5. Talking mic
6. Acoustic hole
7. L/R logo
8. Magnetic charging contact pins

Wear

Step 1: Remove the insulating film.

Step 2: Choose the suitable eartips.

Step 3: Wear it in the ear and adjust to a comfortable position
(please note the left and right earphones).

Power On

Mode 1
Take out earphones from charging case and earphones will power on automatically, At this time, blue LED is on for 1 second.

Mode 2
First of all, earphone is OFF, and press the multifunction button for about 2 seconds. Meanwhile, blue LED is on for 1 second.

Pairing

Mobile phones and earphones

Mode 1: Take out L/R earphones from charging case. The two earphones will automatically pair each other, Then L earphone will automatically enter into the pairing status when blue and white lights flesh alternately. Select and click "ENACFIRE Future" from the Bluetooth list of the mobile phone.

Mode 2: If charging case is not around, follow POWER ON MODE 2's method of operation, the two earphones will actively pair each other.
Note: Left earphone is the master earphone.

Connection lost

Mode 1: Device Bluetooth Function off
If bluetooth function of mobile phone is turned off, earphones will be disconnected. After 5 minutes of reconnection timeout, the earphone will power off automatically.

Mode 2: Out of connection distance
If the connection between the phone and the earphones exceeds the effective range, the earphone will power off automatically after 5 minutes of reconnection timeout.

Incoming call

Answer a call/End a call

Press multifunction button of L earphone once.

Reject a call

Press multifunction button of L earphone twice

Note: Only the Left earphone can hear the voice in Stereo Mode.
The L/R earphone could make phone calls normally in Mono Mode.

Music

Pause

Press the multifunction button once to pause music in the music mode (Some phones may require you to start a media player first).

Play

Press the multifunction button once to play in the music mode (Some phones may require you to start a media player first).

Track forward

Double-press the multifunction button of the R earphone to skip track forward in the music mode.
Note: This function is not supported when L/R headphones are used alone.

Track backward

Double-press the multifunction button of the L earphone to skip track backward in the music mode.
Note: This function is not supported when L/R headphones are used alone.

Mono and stereo use

Mono use

1. Take out one of the earphones from the charging case. Press the multifunction button for 4 seconds until the light of earphone changes white the earphone is OFF,
2. Press and hold the multifunction button for 4 seconds until the blue and white lights flash alternately.
3. Turn on the mobile phone bluetooth list, select and click "ENACFIRE Future", and complete the mono use.
   

Stereo use

1. Put the L/R earphones into the charging case.
2. Take out L/R earphones from the charging case, the two earphones will automatically pair each other,
3. Turn on the mobile phone bluetooth list, select and click "ENACFIRE Future" and complete the stereo use.

Power Off

Mode 1
Put the earphones into the charging case and it will shutdown automatically and the white LED lights up,
Note: Put the left earphone into the charging box separately, the right earphone will automatically enter the pairing state;
Put the right earphone back Into the charging box separately, and the left earphone can be used normally.

Mode 2
When earphone is ON, press and hold the multifunction button for 4 seconds. The white LED light will be on for 1 second.

Charging

Earphone charging

Put the earphones into the charging case.
Charging: LED stays on white.
Full charge: The light is off.

LED status when the charging case charges the earphones

1. The first light flashes when charging case is charging L earphone;
2. The third light flashes when charging case is charging R earphone;
3. When charging case is charging L earphone and R earphone simultaneously, the first and third lights flesh simultaneously;
4. When battery is full, lights of charging case is on for 5 seconds.
   

Charging case charging

LED status when the charging case is being charged
When the power is below 30%, the first LED light flashes;
When the power is 30% ~ 70% the first LED light Is always on, and the second light flashes;
When the power is more than 70%, the first 2 lights are always on, and the 3rd light flashes;
When the power is 100%, 3 lights are always on.

LED Status of charging case in normal use
When the power is below 10%, the first LED light flashes;
When the power is 10% ~ 30% the first LED light is on;
When the power is 30% ~ 70%the first 2 LED lights are on;
When the power is 70% ~ 100% 3 LED lights are always on.

Safety Instruction

Using earphone at high to moderate volumes for extended periods of time Will result in permanent hearing damage, It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery or performing other activities that require hearing surrounding sounds. Do not use earphone in thunderstorm weather, the earphone may not work properly in the condition, and increase the risk of being hit by lighting.
Earphone may not work properly under high temperature or high humidity conditions.
Do not use any corrosive cleaner/ail to clean the earphone. If the earphone comes in contact with liquids. quickly wipe away. It submersed In water, do not turn the earphone on until completely dried.

Tips: liquid submersion voids the warranty.
Keep the earphone and packaging out of reach of children.

Q&A

Q: Why my earphones can not charged?
A: You need to be removed the protective film from the charging part of each earbuds before the first use.

Q: Why the music cuts in and out sometimes?
A: Please make sure there is no obstacle between Enacfire earbuds and your mobile phone.
Please make sure there is no Microwave oven / wifi transmitter around you, which are more likely to produce electromagnetic interference and result in signal interruption
Note: Please keep your phone and the master earphone (L) as close as possible, ensure more stable bluetooth connection.

Q: How to contact ENACFIRE After-sale Teem?
A: If you have any issue with the product, please contact us via support@enacfireglobal.comILIS/ CA) /moongu@enacireglobal.com(UK).
We will reply to your email within 24 hours and 100% solve your issue.