ENACFIRE E60 - Wireless Earbuds Manual

Packaging List

Product Overview

1. Charging Case LED Light
2. Charging port
3. Multifunctional Button
4. Earphone LED
5. Magnetic Charging Pin
6. L \ R Logo
7. Speaker
8. Earphone Mic

Wearing

1. Choose the suitable eartips
   
2. Wear it and adjust to a comfortable position
   (Please distinguish between the Left and Right earphone)
   

Power On & Pairing

Approach 1 - With Charging Case

1. Take out earphones from the charging case
   
2. Select 'ENACFIRE E60" from Bluetooth list
   

Approach 2 - Without Charging Case

1. Power On: Touch the earphones for 1 second. Release when you hear the prompt sound 'Power on' with glue light on.
   
2. Pairing. Earphones will pair automatically with Left earphone Blue and White light flash alternately
3. Select 'ENACFIRE EGO' from the device's Bluetooth list
   

Note: Left earphone s the master earphone

Incoming call

Answer call/End call
Tap the Left Right earphone once

Reject call
Touch the Left / Right earphone for 2 seconds

Music

Pause/ Play
Tap the Left Right earphone once to pa use / ploy music in the music mode
(Some phones may require to start a media player first)

Voice Assistant
Tap the Left/Right earphone 3 times, your device's Voice Assistant will be activated with the 'Beep' prompt sound.

Next Song

Double-tap the Right earphone

Previous Song

Double-tap the Left earphone

Adjust Volume
Touch and hold the Left earphone to decrease volume
Touch and hold the Right earphone to increase volume

Note: 'Above functions are not supported when the earphone is used in single
Prompt sound 'Beep' will be produced when the volume reach minimum or maximum level

Power Off

Mode 1
With Charging Case
Put the earphones back to the charging case. they will power off automatically,
Note: Only put the Right earphone Into the charging case, the Left earphone will stay connected. Only put the Left earphone Into the charging case, the Right earphone will disconnect and stat pairing.

Mode 2
Without Charging Case

1. Turn Off Bluetooth to disconnect the earphones
2. Touch either one earphone for 8 seconds to power off both earphones

Single Mode

Note: There will be 2 "ENACRIRE E60" Bluetooth names show on your Bluetooth list you have connected the Left and Right earphone singly before. Please try to select the another "ENACFIRE E60" if you are unable to connect the earphone singly.
(You can edit the device's name in Bluetooth list under Android system)

Charging

Earphones Charging Status
Earphones white LED light Charging
Earphones white LED light off: Fully charged
Note: It takes about 15 hours to fully charge the earphones

Charging Case Charging Status
Lights on charging case stand for the remaining battery capacity
Note: It takes about 1.5-2 hours to fully charge the charging case

Wireless Charging Supported
We recommend you to use wireless charging pad with Oi certificate
Note: It takes about 2 hours to fully charge the charging case

Note

Please follow below steps when both earphones fall to pair with each other or occur connection related issues

1. Place both earphones to charging case and must remain charging
2. Touch and hold the power buttons of both earphones for 8s with Blue and White lights flash
3. Delete the *ENACFIRE E60' Bluetooth name from your phone and turn off Bluetooth
4. Take out both earphones from the charging case
5. Turn on Bluetooth and click "ENACFIRE E60' from your phone

Safety Instruction

Using earphones at high to moderate volumes for extended periods of time will result in permanent hearing damage, It is advised frat you keep volume levels moderate to low at all times for your safety.
Do not use while driving, cycling, operating machinery or perforrning other activities that require hearing surrounding sounds,
Do not use earphones in thunderstorm weather. The earphones may not work properly in the bad weather condition and may increase the risk of being hit by lightning.
Earphones may not work properly under high temperature or high humidity conditions.
Do not use any corrosive cleaner\oil to clean the earphones, If the earphones come in contact with liquids, quickly wipe away. If submersed in the water do not turn the earphones on until it is completely dried.
Tips: Warranty void If the earphones submersion in the water. Man made damage and lost are not covered under warranty. Keep the earphones and the packaging out of reach of children.

Q&A

Why the music cuts In and out sometimes?

A: Please make sure there is no obstacle between the earphones and your device. Please make sure there is no Microwave oven/WiFi transmitter around you, which are more likely to produce electromagnetic interference and result in signal interruption.
Note: Please keep your phone and the master earphone as close as possible to ensure a more stable Bluetooth connection

A: If you have any issue with the product, please contact us via support@enacfireglobal.com (US/ CA) / moongu@enacfireglobal.conm (UK).
We reply to you within 24 hours and 100% solve your issue.

Customer Support
support@enacfireglobol.com (US/CA)
moongu@enacfireglobel.com (UK)
Tel: +8675582792007
We will reply to you within 24 hours and 100% solve your issues