Table of Contents
Advertisement
Chapter 2 Preparations
1.4
Removing Front Bezel
Remove the front bezel when pressing the POWER switch or removing Top Cover.
To unlock the bezel, insert the attached Bezel Lock Key into the key slot and turn the key
Press to the right and unlock the lever seen on the left when you face the front bezel, and pull only
the left side of bezel by about 10 cm toward you. Then, as shown in the diagram, pull the bezel to
the left toward direction with the lock on the left unlocked to remove the bezel from the device.
Lock
Unlock
Note
Be careful not to press the POWER Switch.
Important
If you fail to remove the front bezel properly, the front bezel might be
damaged.
Pay attention not to press the power switch when installing the front bezel.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
51
Advertisement
Table of Contents
