Table of Contents
Advertisement
Chapter 2 Preparations
3.
Carefully install the device to the rail while confirming that the protrusion part of the device is correctly
inserted in the groove of the rail in the order of 1 → 2 → 3 → 4 on both sides of the outer rail.
4.
Press the lock release button on the side of the rail, and slowly push the device backward with the lock
released. Push the server until its lock on front panel clicks.
5.
If you like to install the included cable tie strip to the rear side of the rack, attach the tie strip to the
mounting hole of the outer rail as shown below.
Express5800/R120h-1M User's Guide
2. Installation and Connection
177
Advertisement
Table of Contents
