National Instruments NI cRIO-9039 User Manual page 19

User LEDs
You can define the USER1 and USER FPGA1 LEDs to meet the needs of your application.
The following table lists the USER1 and USER FPGA1 LED indicators.
LED
USER1 Green/Yellow Use LabVIEW Real-Time to define the USER1 LED with the
USER Green/Yellow Use the LabVIEW FPGA Module and NI-RIO Device Drivers
FPGA1
Ethernet LED Indicators
The following table lists the Ethernet LED indicators.
LED
ACT/LINK
10/100/1000
SD LED Indicators
The cRIO-9039 has two LEDs that indicate the SD card drive mount status and activity. The
following table lists SD LED indicators.
18 | ni.com | NI cRIO-9039 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 18. User LEDs
LED Color
RT LEDs VI. For more information about the RT LEDs VI,
refer to the LabVIEW Help.
software to define the USER FPGA1 LED. Use the USER
FPGA1 LED to help debug your application or retrieve
application status. Refer to the LabVIEW Help for information
about programming this LED.
Table 19. Ethernet LED Indicators
LED Color LED Pattern
—
Green
Yellow
Green
—
Description
Off LAN link not established
Solid LAN link established
Flashing Activity on LAN
Solid 1,000 Mbit/s data rate selected
Solid 100 Mbit/s data rate selected
Off 10 Mbit/s data rate selected
Indication