Installing The Bedknife - Toro 04654 Operator's Manual

Installing the Bedknife

1. Remove the rust, scale, and corrosion from the
bedbar surface and apply a thin layer of oil to
the bedbar surface.
2. Clean the screw threads.
3. Apply never-seize compound to the screws and
install the bedknife to the bedbar.
Figure 25
1. Bedbar
2. Bedknife
4. Torque the 2 outer screws to 1 N∙m (10 in-lb).
5. Working form the center of the bedknife, torque
the screws to 23 to 28 N∙m (200 to 250 in-lb).
g255045
3. Screw
1. Bednife screw tool
2. Install and torque these
first to 1 N∙m (10 in-lb).
6. Grind the bedknife.
16
Figure 26
3. Torque to 23 to 28 N∙m
(200 to 250 in-lb).
g255046