NEC PA1705UL-W Installation Manual page 171

[SOURCE OPTIONS]
Selecting Default Source [DEFAULT INPUT SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST
AUTO
HDMI1
HDMI2
HDBaseT
SDI
[SEAMLESS SWITCHING]
When the input connector is switched, the image displayed before switching is held to switch to
the new image without a break due to absence of a signal.
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default
background is [BLUE].
NOTE:
• Even when the background logo is selected, if two pictures are displayed in [PIP/PICTURE BY PICTURE] mode, the blue background
is displayed without the logo when there is no signal.
[HDBaseT OUT SELECT]
Select signal to output from the HDBaseT OUT port on the projector.
OFF
AUTO
HDMI1
HDMI2
HDBaseT
NOTE:
• If the set input terminals for main and sub screen for [PIP] and [PICTURE BY PICTURE] are differed from the selected input terminals,
any image will be output.
• 4K60p and 4K50p signals can not be output.
Sets the projector to default to the previous or last active input each time the projector is turned on.
Searches for an active source in order of HDMI1 → HDMI2 → HDBaseT → SDI and displays the
first found source.
Displays the digital source from the HDMI 1 IN connector.
Displays the digital source from the HDMI 2 IN connector.
Displays the digital source from the HDBaseT IN port.
Displays the digital source from the SDI IN connector.
No signal is output.
Output the input signal. When two images are projected simultaneously (PIP/PICTURE BY PICTURE),
the image for the main screen is output.
Output the input signal thru the HDMI 1 IN terminal.
Output the input signal thru the HDMI 2 IN terminal.
Output the input signal thru the HDBaseT IN port.
136
5. Using On-Screen Menu