Menu Descriptions & Functions [Display] - NEC PA1705UL-W Installation Manual

5-6. Menu Descriptions & Functions [DISPLAY]
[PIP/PICTURE BY PICTURE]
SUB INPUT
Select the input signal to be displayed in the sub-display.
Please refer to "Using a single projector to project two types of videos at the same time [PIP/PICTURE
BY PICTURE]" (→ page 67) for details on the operation.
MODE
Select either [PIP] (PICTURE IN PICTURE) or [PICTURE BY PICTURE] when switching to 2-screen display.
PICTURE SWAP
The videos in the main display and sub-display will be switched.
Please refer to "Using a single projector to project two types of videos at the same time [PIP/PICTURE
BY PICTURE]" (→ page 67) for details.
PIP SETTING
Select the display position, position adjustment and size of the sub-display in the [PIP] screen.
START POSITION
HORIZONTAL POSITION
VERTICAL POSITION
SIZE
TIP:
• The [HORIZONTAL POSITION] and [VERTICAL POSITION] are the amount of movement from the reference points. For example, when
[TOP-LEFT] is adjusted, the position is displayed with the same amount of movement even if displayed with other [START POSITION]
settings.
The maximum amount of movement is half the resolution of the projector.
Adjust using the vertical posi-
BOTTOM-LEFT
Selection of the display position of the sub-display when switching to the [PIP] screen.
Adjust the display position of the sub-display in the horizontal direction. The respective corners will
serve as reference points.
Adjust the display position of the sub-display in the vertical direction. The respective corners will
serve as reference points.
Select the display size of the sub-display.
Reference point
Adjust using the
horizontal position
tion
TOP-LEFT
Sub-display
Reference point
Reference point
Main display
Reference point
103
5. Using On-Screen Menu
TOP-RIGHT
BOTTOM-RIGHT