NEC PA1705UL-W Installation Manual page 135

[HDR MODE]
AUTO
OFF
ON
NOTE:
• These options are available exclusively for 4K signal.
Using the Lens Memory Function [LENS MEMORY]
This function serves to store the adjusted values for each input signal when using the [LENS SHIFT],
[ZOOM], and [FOCUS] functions of the projector. Adjusted values can be applied to the signal you
selected. This will eliminate the need to adjust lens shift, focus, and zoom at the time of source
selection.
STORE
MOVE
RESET
LOAD BY SIGNAL
FORCED MUTE
TIP:
• Lens memory adjustments will be automatically registered the [ENTRY LIST]. These lens memory adjustments can be loaded from
the [ENTRY LIST]. (→ page 93)
Note that performing [CUT] or [ALL DELETE] in the [ENTRY LIST] will delete lens memory adjustments as well as source adjustments.
This deletion will not take effect until other adjustments is loaded.
• For storing each adjustment of [LENS SHIFT], [ZOOM], and [FOCUS] as common value for all input signal, store them as [REF. LENS
MEMORY].
Automatically distinguishes HDR signal.
Projects the image based on the input signal
Projects the image conforming to the HDR signal
Stores the current adjusted values in memory for each input signal.
Applies the adjusted values to the current signal.
Returns the adjusted values to the last condition.
Moves the lens to the registered lens adjustment position when the signal is switched.
Select whether to mute the picture or not when moving the lens.
100
5. Using On-Screen Menu