NEC PA1705UL-W Installation Manual page 145

PC TOOL
Recall the geometric correction data that is registered in the projector beforehand.
Three types of correction data can be registered.
In addition, recall the geometric correction data that is registered in the projector after adjusting
with the ProAssist software application.
NOTE:
• As electrical correction is carried out in geometric correction, the brightness may be affected and the picture quality may be
degraded.
RESET
Reset the adjustment value that has been set up as [MODE] in [GEOMETRIC CORRECTION] (return
to the initial value).
• This is ineffective when [MODE] is set [OFF].
• Reset can be executed by pressing and holding the Geometric. button on the remote control for
over 2 seconds.
110
5. Using On-Screen Menu