Table of Contents
Advertisement
118 Maintenance
6.
Fill up the cooling system. For instructions, see section
the internal cooling
7.
Close the swing-out frame (if present). Reinstall all shrouds removed earlier.
Assembling the service platform
The service platform is included in the cabinet delivery. It can be used when installing
or servicing liquid-cooled R8i modules.
1.
Fasten the triangular supports to the cabinet frame (5 × M6 screws for each
support). Make sure that the guide pins are properly inserted in the holes of the
frame. Tighten the screws to torque (max 5.5 N·m / 4 lb·ft).
2.
Select the braces (4 pcs) according to the width of the cubicle and attach them
to the supports.
3.
Attach the support feet to the platform and adjust them to the correct height.
4.
Attach the slide plate. Put the hooks (a) at the back of the slide plate through the
holes in the cabinet frame. Align the slots (b) in the slide plate with the braces.
5.
Fix the slide plate into place with the index screws (c) at the bottom of the slide
plate.
circuit.
1
3
Filling up and bleeding
b
a
2
4
c
Advertisement
Table of Contents
