Removal And Reinstallation Of The Operation Panel - Mitsubishi Electric MELIPM Series Instruction Manual

1. PRE-OPERATION INFORMATION

1.3.3 Removal and reinstallation of the operation panel

Hold down the arrow part A, and using the arrow part B as a support, pull the
right hand side of the operation panel toward you and remove the panel
rightward.
1) 2) 3)
B
A
If the operation panel is removed in any other method, force will be applied to the
internal connector, damaging the panel.
To reinstall, insert the tab (left side) of the operation panel into the mounting
position of the drive unit and push in the right hand side tab.
Mounting position
Operation panel
Tab
A
1) 2) 3)
1-4
Get other manuals https://www.bkmanuals.com