Figure 4-9 Connecting Front Cables - NEC NEAX 2400 IMX Manual

INSTALLATION
Connecting Cables
4. Connecting Cables
4.1 Connecting DTI-FCH Front Cables
Connect the furnished front cable to the connectors on the DTI and FCH cards. Use DTI and CN2 connec-
tors on the FCH and DTI cards respectively. Since an FCH card is equipped with one Handler circuit, a
maximum of five FCH cards can be connected to a DTI card. (See
is also cascaded, a maximum of three FCH cards can be added to the DTI card. (DCH is equipped with two
Handler circuits per card.)
Connect "10AL(10)FLT CA" to the connectors.
FCH (PA-FCHA)
10AL(10)FLT CA
10AL(10)FLT CA
DTI
FCH
CHAPTER 4
Page 42
Revision 3.0
DTI (PA-24DTR)
OPE
MB
2
CN2
FRONT VIEW

Figure 4-9 Connecting Front Cables

ND-70185 (E)
Get other manuals https://www.bkmanuals.com
Figure 4-10.) However, if a DCH card
OPE
MB
2
10AL(10)FLT CA
FRONT VIEW
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Anti-static Kit