Figure 4-1 Static Caution Indicator - NEC NEAX 2400 IMX Manual

CHAPTER 4 INSTALLATION
This chapter covers the installation of the Fusion system. The following topics are covered:
• How to set switches on the following circuit cards:
PA-M96 (HUB)
PA-FCHA (FCH)
PA-24DTR (DTI)
• How to mount the circuit cards
• How to run the 10 BASE-T cables
1. Anti-Static Caution
This manual provides Static Caution indicators on pages where work involving static-sensitive components is
described. When performing work accompanied by this mark, be sure to use the anti-static kit.
the Static Caution indicator.
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required

Figure 4-1 Static Caution Indicator

ND-70185 (E)
Get other manuals https://www.bkmanuals.com
Figure 4-1 shows
CHAPTER 4
Page 29
Revision 3.0