Advertisement
5
—
2. Installation
Contents of this chapter
This chapter describes the installation and wiring of the VFD-GATEWAY, showing how to mount the device and where
the power/communications connections are made.
2.1 Mounting the VFD-GATEWAY
DIN rail according to DIN EN 50022 35 mm, depth 7.5 mm or 15 mm:
Mounting with screws M3 (see Appendix for hole fixing dimensions):
Note: TA543 option (not included) is ordered separately from the VFD-GATEWAY.
Fastening torque 1.2 Nm
LVD-EOMU02U-EN REVD 11/2022
Advertisement
