Display - Kenwood DeLonghi Cooking Chef KM070 Technical & Service Manual

Features & Operation

Display

Display
The LCD display can be toggled to display
either the timer or the temperature.
The timer
It shows either minutes/seconds or
hours/minutes.
The temperature is displayed in °C. This
display also shows error codes
indicating interlock errors and technical
errors.
LED lights flash to indicate that heating,
stirring and fold/pulse actions
are in operation.
Timer operation
• The timer will only count up or down when
a mixing or stir function is selected via the
speed control knob.
• The timer can only be set (or re-set) when
the machine is stopped.
• The timer is set in 5 second increments.
When mixing
• When started the timer will count up,
unless the timer has been set by using the
+/- buttons. Mixing will continue until the
timer reaches 3 hours, at which point the
mixing will stop and there will be an
audible sound. This will also switch the
heating OFF.
• If the timer has been set by using the +/-
buttons, the timer will count down when
mixing is started. Mixing will continue until
the timer counts down to 00:00, at which
point the mixing will stop and there will be an
audible sound. This will also switch the
heating OFF.
• The timer will pause if the speed control is
rotated to the "0" position and will start again
when it is rotated back to any ON position.
Whilst stopped, the elapsed time will be
displayed.
• The timer can be reset to 00:00 by pressing
the + and - buttons at the same time for 0.5
seconds.
• The timer is limited to 3 hours maximum.
7