Table of Contents
Advertisement
4
When you encounter problems described in this chapter or error messages in the CXDI Control Software
while using this product, search the table in this chapter for the problem or error message and try the
solutions.
If the problem persists, turn off the detector, consult your sales representative or local Canon dealer, and
inform them of the details of the problem, error codes or error messages.
Power LED lamps flash
(1-second cycles) and
exposure is not
possible.
16
Troubleshooting
Symptom
messages in the CXDI
Control Software
No battery power.
Cause/Error
Replace the battery pack with a fully-
charged one and retry an exposure.
Remedy
Advertisement
Table of Contents
