Data Processing - Canon CXDI-Pro Instructions For Use Manual

3.3 Checking exposed images
1
When the exposed image is displayed on the monitor of the
image-capture computer, confirm that the exposure conditions
and target body part are correct, that there is no blurring due to
patient movement, etc.
3.4

Data processing

1
Image processing such as LUT processing and frequency
processing takes place using the image processing parameters
set beforehand by the operator.
2
Metadata such as Patient ID information is assigned to the image
data following image processing, and the image information is
transferred to the specified device.
3.5 Ending use of the system
1
Shut down the image-capture computer.
2
Press the POWER switch of the detector to turn it off.
3
Operating procedures
13