Table of Contents
Advertisement
3
Operating procedures
3.6
List of detector status indication
Standard Synchronization Mode
Power OFF
Power ON
Linkage started
Linkage ended
Switching to exposure ready status
Exposure ready status
Detector selection status (Sleep)
Error
*1 The indication of the Power LED lamps changes according to the remaining battery charge.
*2 Only after linkage from the detector
3.7
List of lights / flashes / notification
beeps of the ready indicator
Standard Synchronization Mode
LED lamp
Notification
sound
*1 On/Off status changes three times every 0.5 seconds
*2 Only 1 second
14
Detector status
Link
(registration)
completed
The 2 LED
*1
lamps flash
.
Three-tone
beep
Status indicators
Power LED
Not illuminated
Illuminated
Illuminated
Illuminated
Illuminated
Illuminated
Illuminated
Flashing
During exposure ready status
Start time
The 2 LED lamps light up weakly.
Single beep
*1
READY LED
Not illuminated
Not illuminated
Flashing slowly in 4-
second cycles
(max. 8 seconds)
Illuminated (2 sec.)
Flashing
Illuminated
Not illuminated
Flashing
During exposure
When the X-ray is
exposed
The 2 LED lamps
light up
Two-tone beep
*2
*2
.
Advertisement
Table of Contents
