Table of Contents
Advertisement
The local user interface is where you configure the unit and perform system operations. These
operations consists of:
Configuration
Selection
Switch
Auto Find
Stops
Open Stop
Adjustment
Autotuning
12 | =BHGE
This switch provides control to the following functions:
Actuator Air Action
Select autotuned or preset tuning parameters
This function automatically sets the lower and upper stops. See "Auto
Find Stops" on page 43 for this procedure.
Use the Open Stop Adjustment screw to perform an upper stop
adjustment and save it to the device. See "Open Stops Adjustments"
on page 44 for this procedure.
The autotune process determines optimum tuning parameters for
the valve being commissioned. This function is only active when the
Configuration Selector Switch is set to AutoTune. See "Auto Tune" on
page 48 for this procedure.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Advertisement
Table of Contents
