Table of Contents
Advertisement
Tuning
Methods for tuning the SVi1000:
Preset Tune
Preset tuning is done according to valve/actuator size. Figure 22 shows the graphic that appears
on the local user interface. As valve size increases values increase from 1 to 7 and 9 to F. 0 and
8 are reserved for auto tuning ATO and ATC valves, respectively.
Preset tuning becomes active immediately.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Presets; The fastest and easiest commissioning is to use a preset tuning for
the actuator in use ( "Preset Tune"). Using presets saves time as you do not
run Auto Tune.
Auto Tune: If desired, run Auto Tune ( "Auto Tune" on page 48).
PID Settings: The third method is to manually tune PID settings for fine
tuning, if desired. See the online help.
Gain increases as
the tuning value
increases.
Figure 22 Preset Tuning Values
Masoneilan SVi1000 Positioner Quick Start Guide =| 45
Advertisement
Table of Contents
