Suzuki NEXA FRONX Owner's Manual & Service Booklet page 293

NOTICE
Observe the periods designed for the
engine oil and filter replacement.
Degraded oil or clogged filters can
cause engine malfunction or abnor-
mal noise. For replacement, consult
with a Maruti Suzuki authorized work-
shop.
Specification and viscosity of engine oil
As performance factors such as fuel con-
sumption depend on the engine oil used,
use oil that satisfies the specifications in
the following Table 1 and Table 2. Using
Maruti Suzuki genuine oil is recom-
mended.
Table 1
Specification Oil quality
API(*1) /
SP / GF-6
ILSAC(*2)
Table 2
For K12N(DOHC) Engine
For India
Specification All vehicles
Viscosity: SAE(*3) 0W-16
Except For India
Specification All vehicles
0W-20,
Viscosity: SAE(*3)
5W-30,0W-16
For K10C(DITC) Engine
For India
Specification All vehicles
Viscosity: SAE(*3) 5W-30
Except For India
Specification All vehicles
5W-30,10W-30,
Viscosity: SAE(*3)
10W-40
*1: The API standard is determined by the
American Petroleum Institute and rep-
resents the quality grade of engine oil.
*2: The ILSAC standard is an engine oil
standard for automobiles, established
by the International Lubricant Specifica-
tion Advisory Committee, and is based
on the API standard while indicating
ADVICE FOR YOUR DRIVING
even higher performance specifica-
tions such as for fuel conservation and
durability.
*3: SAE viscosity is a standard that deter-
mines the viscosity of lubricating oil.
The number on the left side (the num-
ber with a "W") means the viscosity at
low temperature. The smaller this figure
is, the stronger the oil resistance to
coldness is and the better the engine
start capability is. The number on the
right side means the viscosity at high
temperature. The larger this figure is,
the stronger the oil resistance to heat is
and the better the engine protection
performance is.
55TH0-74E
6-14