Suzuki NEXA FRONX Owner's Manual & Service Booklet page 258

(2)
74TB05011
4) 3D view mode image will be displayed.
Press the button (2) for adjusting the
image quality.
5) Adjust brightness and contrast of the
image to your preference.
NOTE:
• The figure of the set brightness varies
depending on ON/OFF condition of the
light.
• Refer to the owner's manual of infotain-
ment system for details.
Setting of the 360 view camera and the
front and rear traffic alert
When you change the setting, perform the
following procedure:
1) Set the parking brake firmly.
2) Press the engine switch to change the
ignition mode to ON.
(1)
55TB5029
3) After the opening image is finished,
press a camera switch (1).
(2)
74TB05034
4) 3D view mode image will be displayed.
Press the button (3) for the setting.
OPERATING YOUR VEHICLE
(4)
74TB05014
5) Touch the indication (4) to perform the
setting of the 360 view camera. Change
the setting to your preference. To
switch to the different page, press
.
55TH0-74E
or
5-94