Suzuki NEXA FRONX Owner's Manual & Service Booklet page 138

NOTE:
For Auto Gear Shift models, the manual
mode indicator will only appear when the
gearshift lever is in "M".
Drive mode indicator
(for Auto Gear Shift vehicles)
When the gearshift lever is in "D", the dis-
play shows the drive mode indicator (16).
For details on how to use the transmission,
refer to "Using transmission" in the "OPER-
ATING YOUR VEHICLE" section.
Gearshift Indicator (for manual trans-
mission vehicles)
Refer to "Gearshift indicator" in "OPERAT-
ING YOUR VEHICLE" section.
Odometer / Trip Meter
The display (E) shows the odometer and
trip meter.
The odometer records the total distance
the vehicle has been driven.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use trip meter A or trip meter B
independently.
To switch the display indication (E), push
the trip meter selector knob (2) quickly.
To reset the trip meter, push and hold the
trip meter selector knob (2) for few sec-
onds when the display shows the trip
meter.
NOTICE
Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.
INSTRUMENT CLUSTER
Setting Mode
When the ignition switch is in "ON" position
or the ignition mode is ON and the vehicle
is stationary, you can enter into the setting
mode of the information display by pushing
and holding the indicator selector knob (3)
for few seconds.
• To select the setting item that you want
to change, turn the indicator selector
knob (3) left or right.
• To change the setting, push the indicator
selector knob (3).
• To exit the setting mode, select "Back"
and push the indicator selector knob (3).
74TB04015
NOTE:
The currently selected setting item is sur-
rounded by a frame.
55TH0-74E
4-26